1. Home
  2. Training Quiz: Tissue-Tek Film® (Service Training)

Training Quiz: Tissue-Tek Film® (Service Training)

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.
1. Baskets are going into carousel and hitting the edge of the carousel runout prevention plate at all 12 stations. Which service mode alignment is needed to center the carousel to basket?(Required)
2. Gap between runout prevention plate and edge of longest slide used by lab should be approximately?(Required)
3. Whenever runout prevention plate is adjusted, what component needs to be aligned to the new runout prevention plate position?(Required)
4. Pressure roller has spring loose/missing, what would not be an adverse effect caused by this?(Required)
5. Basket arm is not aligned properly when picking up basket from loading container, which service mode partial adjustment alignment is used to correct this?(Required)
6. DC Power supply output should be?(Required)
7. Which of the following would not be a suspect in causing EC15?(Required)
8. User has purchased a new unit and they are using slides with cut corners, since factory default setting is adjusted for squared edge slides the film is hanging off the cut corner at the trailing edge. Which service mode function is used to adjust this?(Required)
9. Unit is giving EC15, sub EC112. The ejector is centered on the slide when pushing out from the basket, when returning to the basket the slide is entering high in the slot, sometime hitting the top slot. Which service mode function is used to adjust this (pick one)?(Required)
10. No xylene is flowing from the unit, all other functions work OK with no ECs. What part would need to be replaced?(Required)