1. Home

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.
1. When the handwheel is properly balanced, with the handwheel in the locked position the microtome should be in which position?(Required)
2. When the handwheel is properly balanced, with the handwheel in the locked position the counterweight should be in which positio n?(Required)
3. During ozone sensor check, with no ozone being generated the ambient reading of the sensor should be:(Required)
4. During ozone sensor check, when ozone is present what is the proper reading of the ozone sensor value?(Required)
5. The power supply for the Cryo Plus Bar TEC ass embl y should measure what voltage?(Required)
6. The Main power supply should measure what voltage?(Required)
7. The microtome horizontal driver PCB is located:(Required)
8. The microtome vertical driver PCB is located:(Required)
9. When the TEC Assembly is activated on the cryo plus bar, what should the temperature reading be of the cryo bar?(Required)
10. When troubleshooting the TEC Assembly on the cryo plus bar, when the connector is disconnected the temperature reading should be:(Required)