1. Home

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.
1. When checking micrometer advance calibration setting, when micrometer advance knob is set at 20 micrometer setting, how many turns of the handwheel should be completed to rotate the center of the micrometer advance spindle one full 360-degree rotation?(Required)
2. The coarse trimming lever is set at approximately what micrometer advance settings?(Required)
3. Referring to explodes parts list “Base Plate”, user reports that Clamping lever#7 when rotated does not secure lower base of knife/blade holder. What is common cause of this?(Required)
4. To perform “coarse” facing of paraffin block (approximately 40 micrometer sections), instead of rotating micrometer advance setting knob what feature can be utilized to perform this?(Required)
5. Rotating Coarse feed wheel on left side performs which function?(Required)
6. Which of following items would not cause uneven (thick/thin) sectioning?(Required)
7. Which safety feature can user use to prevent accidental cutting of hand?(Required)
8. If micrometer advance calibration is off per question #1, referring to exploded parts list “Micrometer mechanism with retraction” which part can be adjusted to correct the calibration?(Required)
9. Referring to exploded parts list “Cross Roller Bearings”, which part is designed to keep paraffin from building up inside the microtome?(Required)
10. Referring to exploded parts list “Knife Holder E” which part does user move to lesson clamping plate tension when replacing blade?(Required)