1. Home

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.
1. When measuring Magnetron return voltage, what is the proper measuring points?(Required)
2. When measuring Magnetron return voltage, when DA value is at 179, what voltage should a good Magnetron measure?(Required)
3. When measuring stations 3 & 4 vacuum using “vacuum on” test, what should the vacuum read (assuming no high altitude adjustments)?(Required)
4. If EC 1202 (Reagent does not supply to preheat chamber #1) occurs, which could not be a cause of this error?(Required)
5. When performing supply test at stations 3 & 4, what should vacuum reading be on the screen?(Required)
6. When checking robotic arm alignment, it is noted arm is not centered on X axis when placing baskets into station #2. Which procedure will center the arm alignment?(Required)
7. If EC1217 occurs (retort#3 does not drain), which could be the cause?(Required)
8. If EC 1201 occurs at station #3 (lid not closed) which would not be applicable troubleshooting?(Required)
9. The bubbling pumps at stations 1-2 perform what function?(Required)
10. Procedure to gain access to Service Mode is:(Required)